This page converts milliliters per minute into cubic meters per minute using the factor 1e-06, and shows the reverse figure alongside it. Both units measure volumetric flow, which is why one number does the whole job.
Compressor and large-fan output in metric markets. Laboratory and infusion flow: HPLC pumps and syringe drivers are set in mL/min.
Standard versus actual volume. Gas flow in CFM depends on pressure and temperature, which is why compressor ratings say SCFM and specify the reference conditions. Converting the number is exact; comparing two ratings measured at different conditions is not. Below the calculator there is a step table for the values people look up most, and a second table putting real volumetric flow figures into cubic meters per minute so the number you get has something to be compared against.
The formula
milliliters per minute- The amount you are converting, in milliliters per minute
1e-06- The exact number of cubic meters per minute in one milliliter per minute
cubic meters per minute- The converted result
How it works, step by step
- Enter the value in milliliters per minute.
- It is multiplied by 1e-06, the exact factor between the two units.
- The answer is shown in cubic meters per minute, with the reverse conversion beneath it.
- Check the reference table if you want a figure of comparable size.
Worked examples
A shower head: 9600 mL/min in cubic meters per minute
Take a shower head, roughly 9600 mL/min. The conversion is a single multiplication — 9600 × 1e-06 — giving 0.0096 m³/min. Because the relationship is proportional, doubling the input doubles the answer to 0.0192 m³/min.
A dripping tap: 6 mL/min in cubic meters per minute
At 6 mL/min (a dripping tap), the same quantity in cubic meters per minute is 6 × 1e-06 = 6e-06 m³/min. One milliliter per minute is 1e-06 cubic meters per minute, so the numbers shrink as expected.
How to read your score
Frequently asked questions
How many cubic meters per minute are in one milliliter per minute?
Exactly 1e-06. Every figure on this page is that one number multiplied by your input, so the only rounding is at the display step.
What is the formula to convert milliliters per minute to cubic meters per minute?
cubic meters per minute = milliliters per minute × 1e-06. Reversed, milliliters per minute = cubic meters per minute ÷ 1e-06, which is the same as multiplying by 1,000,000.
Which is the bigger unit, the milliliter per minute or the cubic meter per minute?
The cubic meter per minute. One milliliter per minute is only 1e-06 of a cubic meter per minute, so it takes 1e+06 milliliters per minute to make one cubic meter per minute.
What does this quantity actually measure?
Both units measure volumetric flow. That is why a single factor is enough: there is no temperature offset and no material property involved, unlike conversions that cross between different quantities.
What is a milliliter per minute?
Laboratory and infusion flow: HPLC pumps and syringe drivers are set in mL/min.
What is a cubic meter per minute?
Compressor and large-fan output in metric markets.
Why does my answer differ from another converter?
Almost always because the other tool rounded the factor before multiplying. This page keeps full double precision through the calculation and rounds only for display, and it prints the factor it used so you can see where any difference came from.
Milliliters Per Minute to cubic meters per minute reference tables
| Milliliters Per Minute | Cubic Meters Per Minute |
|---|---|
| 0.5 mL/min | 5e-07 m³/min |
| 1 mL/min | 1e-06 m³/min |
| 2 mL/min | 2e-06 m³/min |
| 3 mL/min | 3e-06 m³/min |
| 5 mL/min | 5e-06 m³/min |
| 10 mL/min | 1e-05 m³/min |
| 20 mL/min | 2e-05 m³/min |
| 25 mL/min | 2.5e-05 m³/min |
| 50 mL/min | 5e-05 m³/min |
| 75 mL/min | 7.5e-05 m³/min |
| 100 mL/min | 0.0001 m³/min |
| 250 mL/min | 0.00025 m³/min |
| 500 mL/min | 0.0005 m³/min |
| 1000 mL/min | 0.001 m³/min |
| 5000 mL/min | 0.005 m³/min |
Exact factor: 1 milliliter per minute = 1e-06 cubic meters per minute.
| Quantity | mL/min | m³/min |
|---|---|---|
| A dripping tap | 6 mL/min | 6e-06 m³/min |
| A bathroom tap | 6000 mL/min | 0.006 m³/min |
| A shower head | 9600 mL/min | 0.0096 m³/min |
| A garden hose | 1.8e+04 mL/min | 0.018 m³/min |
| A fire hydrant | 3.6e+06 mL/min | 3.6 m³/min |
| The Thames at London | 3.9e+09 mL/min | 3900 m³/min |
Published reference values, converted with the same factor this page uses.