This converter turns mils into inches instantly, using the exact factor 1 mil = 0.001 inches. Type any number and the result updates as you go — nothing is sent to a server, so the arithmetic happens entirely in your browser.
One thousandth of an inch, the standard thickness unit for plastic film and PCB traces. Exactly 25.4 millimetres since the 1959 international yard agreement.
Because the relationship is a simple proportion, one multiplication does the whole job. The table further down gives pre-computed values for the amounts people look up most often, and the result panel also reports the reverse conversion so you can check the figure both ways.
The formula
mils- The amount you are converting, measured in mils
0.001- The exact number of inches in one mil
inches- The converted result
How it works, step by step
- Enter the number of mils you want to convert.
- The value is multiplied by 0.001, the exact conversion factor.
- The result is displayed in inches, rounded for readability.
- The unrounded value and the reverse conversion appear underneath so you can verify it.
Worked examples
Converting 5 mils
Multiply 5 by 0.001. That gives 0.005 inches. A quick sanity check: one mil is smaller than one inch, so the number should get smaller — and it does.
Converting 72 mils
72 × 0.001 = 0.072 inches. Working backwards, 0.072 ÷ 0.001 returns 72 mils, which confirms the factor is applied the right way round.
How to read your score
Frequently asked questions
How many inches are in one mil?
Exactly 0.001. Every conversion on this page is that single number multiplied by your input, so the result carries no rounding error beyond what is shown.
What is the formula to convert mils to inches?
Inches = mils × 0.001. To reverse it, divide instead: mils = inches ÷ 0.001, which is the same as multiplying by 1000.
Is the mil bigger than the inch?
No. One mil is only 0.001 of a inch, so the inch is the larger unit.
Why does my answer differ slightly from other mils to inches converters?
Most differences come from rounding the factor too early. This tool keeps full double precision through the calculation and only rounds at the final display step, and it also shows the unrounded value so you can see exactly where any difference appears.
What is a mil?
One thousandth of an inch, the standard thickness unit for plastic film and PCB traces.
What is a inch?
Exactly 25.4 millimetres since the 1959 international yard agreement.
Mils to inches reference table
| Mils | Inches |
|---|---|
| 0.5 mil | 0.0005 in |
| 1 mil | 0.001 in |
| 2 mil | 0.002 in |
| 3 mil | 0.003 in |
| 5 mil | 0.005 in |
| 10 mil | 0.01 in |
| 15 mil | 0.015 in |
| 20 mil | 0.02 in |
| 25 mil | 0.025 in |
| 50 mil | 0.05 in |
| 75 mil | 0.075 in |
| 100 mil | 0.1 in |
| 250 mil | 0.25 in |
| 500 mil | 0.5 in |
| 1000 mil | 1 in |
Exact factor: 1 mil = 0.001 inches. Values rounded for display.